The Ford Barn - View Single Post

Glenn C. · 07-24-2010, 10:16 AM

The hub has two holes that allows the grease to move into the center of the bearing between the two halves. You grease the hub, grease moves around and along the input bearing retainer, and escapes through the holes to the bearing.

07-24-2010, 10:16 AM	#5
Glenn C. Senior Member Join Date: May 2010 Location: Didsbury Alberta Posts: 838	Re: clutch release bearing The hub has two holes that allows the grease to move into the center of the bearing between the two halves. You grease the hub, grease moves around and along the input bearing retainer, and escapes through the holes to the bearing.