[Bob Bidonde]

Here are some considerations for turn signals and additional brake lights:
>Modern cars are low to the ground, so auxiliary brake lights and turn signals need to be positioned at a height so they are very noticeable by to a modern car driver. The rear window of Model "As" is too high;
>Be sure that the turn signal switch is electrically grounded;
>Incandescent bulbs are not bright enough to get the attention of modern drivers, so use LEDs;
>On 1930 & '31 Model "As," the amber light is confusing to modern drivers, so red LED brake lights send a message that is understandable as STOP or SLOW DOWN;
>Use a noisy signal flasher so you remember to turn the signal OFF when appropriate.