Re: 1933 transmisson rebuild/repair
Frank,
2nd gear in your trans spins on a bronze sleeve which is fixed to the output
shaft by means of a spline. It would not shock me at all if that 2nd gear sleeve was
cracked and came out in pieces when/if you disassemble the trans. Second gear spins on that sleeve any time your
car is moving EXCEPT when the trans is in 2nd.
Once you've yanked the trans and rebuilt it.........using Mac's book...........
you'll be a veteran. The first tool is Mac VanPelts book.
You may need a press to remove the input shaft/gear bearing .
Charlie ny
|