View Single Post
Old 03-19-2012, 10:54 AM   #13
Jim Brierley
Senior Member
 
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,066
Default Re: Model B adjustable Lifters ?

The 1 1/8" lifters work fine on most if not all performance grinds although I use stock B lifters on my Bonneville engine with a divot taken out of the top for the push-rod to recess into. If a larger foot is desired other lifters such as flathead Chrysler lifters will fit with a slight enlargement of the bore in the block, this is sometimes needed anyway as the block can wear and cause an odd noise as the lifter rotates and clearance comes and goes.
Jim Brierley is offline   Reply With Quote