The Ford Barn - View Single Post

COE Dan · 11-27-2012, 03:40 PM

Thanks all for the help. I've tried all your suggestions and am no farther along than before. The corners are molded and there is no wrinkling or warpage on the corners when installed which is nice, I just can't get it to seat fully in the frame. I'll call Drake before trying anything else...next step is to modify the seal to fit i fear. I'm in Hawaii and I use the crank out winshield all the time.

COE Dan

11-27-2012, 03:40 PM	#15
COE Dan Senior Member Join Date: May 2010 Location: Now in Wichita, KS Posts: 251	Re: Help needed to fit '39 windshield seal Thanks all for the help. I've tried all your suggestions and am no farther along than before. The corners are molded and there is no wrinkling or warpage on the corners when installed which is nice, I just can't get it to seat fully in the frame. I'll call Drake before trying anything else...next step is to modify the seal to fit i fear. I'm in Hawaii and I use the crank out winshield all the time. COE Dan