The Ford Barn - View Single Post

JWL · 06-14-2011, 05:56 AM

No, Ford did not machine threads for the grub screw. Yes, the grub screw is necessary if oil is to be sent into the filter. No, it is not necessary to relocate the cam bearing if the fuelpump pushrod bushing is in place.

06-14-2011, 05:56 AM	#2
JWL Member Emeritus Join Date: May 2010 Location: Fitzgerald, Georgia Posts: 2,204	Re: The Flathead oil modification thread... No, Ford did not machine threads for the grub screw. Yes, the grub screw is necessary if oil is to be sent into the filter. No, it is not necessary to relocate the cam bearing if the fuelpump pushrod bushing is in place.