The Ford Barn - View Single Post - Advice to change 6 volt to 12 volt Model A

john in illinois · 07-09-2010, 04:34 PM

I use 12 volts because with halogen lights you only have half the amps going through your wiring and switch. Easy on the whole system.As mentioned Les Andrews book is helpful(both).
Good luck,John

07-09-2010, 04:34 PM	#11
john in illinois Senior Member Join Date: May 2010 Location: Illinois Posts: 2,183	Re: Advice to change 6 volt to 12 volt Model A I use 12 volts because with halogen lights you only have half the amps going through your wiring and switch. Easy on the whole system.As mentioned Les Andrews book is helpful(both). Good luck,John