[rotorwrench]

I don't know of any complete kits but you can still find round back spindles from the 37 thru 41 cars or the square back ones from 42 thru 48 and use those as a basis for 40 thru 48 brakes or purchase the Lincoln repop backing plates for the Bendix design brakes that will still work with Ford 12-inch drums or some of the repop Lincoln 12-inch drums. Getting the pedal assembly set up to work a master cylinder just depends on what fits the best for the 33/34 cars. Someone else may be able to steer you for the best pedal layout or modifiaction to use for this purpose. Brake lines will have to be fabricated to fit along with flex lines for the front wheels and rear axle. If your using the OEM wire wheels, there are adapter rings that will allow them to be installed on the later type drums.