Thread: Steering Box ?
View Single Post
Old 07-24-2010, 10:28 AM   #7
CWPASADENA
Senior Member
 
CWPASADENA's Avatar
 
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,881
Default Re: Steering Box ?

If things are worn out, they can not be adjusted properly. If all the internal parts are good, it is not rocket science, it just takes a little patience and follow the directions.

Taking a little end play out of the sector shaft is no big beal, just go a little at a time and note where you started from. Worst case, you can always put the adjustment back as it was and be no worse off. Chances are, it may be a little better.

My opinion,

Chris

Last edited by CWPASADENA; 07-24-2010 at 10:29 AM. Reason: TYPO
CWPASADENA is offline   Reply With Quote