View Single Post
Old 04-05-2012, 06:37 PM   #15
Buford
Senior Member
 
Buford's Avatar
 
Join Date: May 2010
Location: La Luz, NM. 88337
Posts: 1,050
Default Re: Help with a Fordomatic transmission

[QUOTE=Daves55Sedan;401044]
Quote:
Originally Posted by Buford View Post
Hi Dave, PM me with more info...I don't need the converter or the bell housing, just the transmission including the pan and fill tube/dipstick.

The older Fordomatics did not have a fillertube/dipstick. They have a filler-cap on the right side of the trans case near the rear. In order to fill the trans with fluid, it is necessary to pull-up the floor-covering and pop-out the big rubber plug in the floor hump to access the cap. If your trans has the fillertube/dipstick, I believe it is from a newer model

My transmission has the filler on the passenger side rear corner like you suggested...I was told that the '52 and up had a fill pipe with dipstick...please email me with all the particulars on the trans you have...thanks, Karl. [email protected]
Buford is offline   Reply With Quote