View Single Post
Old 02-27-2011, 10:35 AM   #1
Bill O'Brien
Senior Member
 
Join Date: Jul 2010
Location: Pottersville, NJ
Posts: 238
Question Rivet Installation / Air Hammer

I would like to replace the corner covers on my hood and the rubber parts that are riveted onto the hood.

I have this kit minus the yellow rivet tool.

http://www.brattons.com/product.asp?...istory=related

What size air hammer would work with the rivet installation kit I have? Would this one work??



http://cgi.ebay.com/ws/eBayISAPI.dll...m=170247118307


**1 5/8" stroke provides the power for general cutting chipping and scraping needs
**At 5000 blows per minute provides the speed for fast exhaust removal and masonry
**Built in power regulator to control speed during delicate usage
**Designed to use with .401 Parker taper chisels

Would the yellow rivet tool from Brattons work for what I want to do? I am not sure it would be deep enough.
Attached Images
File Type: jpg rivet kit.jpg (4.4 KB, 2 views)
File Type: jpg air h.jpg (82.9 KB, 0 views)
Bill O'Brien is offline   Reply With Quote