View Single Post
Old 02-09-2014, 10:10 AM   #6
Logan
Senior Member
 
Logan's Avatar
 
Join Date: May 2010
Location: Fort Worth, Texas
Posts: 1,055
Default Re: Bronze or Aluminum timing gear

Sponsored Links (Register now to hide all advertisements)
Aluminum makes a little bit of noise, but not bad if both gears are meshing well. The bronze won't make as much noise as an aluminum gear, and I have yet to hear of anyone breaking a bronze set. The only down fall of the bronze set up is the $. But if you're building a motor, what's just a little bit more $ at that point. The way I look at it, both are a huge improvement over the fiber gear.
__________________
Cowtown A's
Logan is offline   Reply With Quote