Thread: resister required for a replacement coil
View Single Post
Old 04-25-2012, 07:27 AM   #3
streetdreams
Senior Member
 
Join Date: Dec 2010
Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan
Posts: 638
Default Re: resister required for a replacement coil
It's not the coil so much as the points if you're still running them. I would use the resistor. With points or a Pertronix system, a resistor should be used.
streetdreams is offline   Reply With Quote