The Ford Barn - View Single Post

Terry, NJ · 11-02-2016, 12:05 PM

I've been having a lot of back and hip problems lately so I haven't been doing much. I did order a new condenser and replaced it. Turns out the other one is dead (I won't say "Burned out" because it doesn't seem burned anywhere, tests with my condenser tester show an open circuit) As I said, I don't do much lately but I install the condenser yesterday and It still has no spark, Gas seems OK now, I have Mitch's 3039 filter in place. But it has no fire! Today I went outside and the Coil was hot to the touch, Guess who forgot to turn it off! Did I have the coil wired in correctly or was it backwards? and I'm actively taking suggestions about the Ign. System and possible causes of it's breakdown!
Terry

11-02-2016, 12:05 PM	#16
Terry, NJ Senior Member Join Date: May 2010 Location: Bucks Co, Pa Posts: 3,740	Re: Why didn't it start again? I've been having a lot of back and hip problems lately so I haven't been doing much. I did order a new condenser and replaced it. Turns out the other one is dead (I won't say "Burned out" because it doesn't seem burned anywhere, tests with my condenser tester show an open circuit) As I said, I don't do much lately but I install the condenser yesterday and It still has no spark, Gas seems OK now, I have Mitch's 3039 filter in place. But it has no fire! Today I went outside and the Coil was hot to the touch, Guess who forgot to turn it off! Did I have the coil wired in correctly or was it backwards? and I'm actively taking suggestions about the Ign. System and possible causes of it's breakdown! Terry