The Ford Barn - View Single Post

Kurt in NJ · 09-12-2010, 10:58 PM

It is best to not breath the fumes when welding galvanized metal --grind it off where you plan to weld

http://www.finishing.com/85/35.shtml

I started to build a "test" stand, it evolved into a smiths compressor mounted on a rambler axle, I started with a Worthington tractor frame.

09-12-2010, 10:58 PM	#17
Kurt in NJ Senior Member Join Date: May 2010 Location: on the Littlefield Posts: 6,159	Re: Engine Rake It is best to not breath the fumes when welding galvanized metal --grind it off where you plan to weld http://www.finishing.com/85/35.shtml I started to build a "test" stand, it evolved into a smiths compressor mounted on a rambler axle, I started with a Worthington tractor frame.