The Ford Barn - View Single Post

Bruce Lancaster · 03-03-2011, 01:58 PM

They also have axle keys (slightly too long, but 30 seconds of grinding would put theirs into a Ford) and steering wheel Woodruff keys (theirs is a regular SAE spec one, and requires very slight filing to match the Ford one, which was a special Ford part and not a standard key)
A Model A-Model B oil pump holder inner for when the pan is off can also be effortlessly constructed right at Home Depot.
Research continues...

03-03-2011, 01:58 PM	#11
Bruce Lancaster Member Emeritus Join Date: May 2010 Location: Madison, NJ Posts: 5,230	Re: Stromberg 97 rebuilding instructions They also have axle keys (slightly too long, but 30 seconds of grinding would put theirs into a Ford) and steering wheel Woodruff keys (theirs is a regular SAE spec one, and requires very slight filing to match the Ford one, which was a special Ford part and not a standard key) A Model A-Model B oil pump holder inner for when the pan is off can also be effortlessly constructed right at Home Depot. Research continues...