[Charlie ny]

Bruce,
These are great suggestions, I'm sure things will go fine if
you are careful. One little sticky item too often overlooked is the power
jet buried down at the bottom of the acc pump bore. Be sure to remove it
and check to be certain it does not leak.
The emulsion tubes can be removed by tapping them ,after
the jets are removed of course. with a 6-32 tap about 3/16 deep. Run a
6'32 screw into the threads and place a long punch into the tube from the venturii end and gently tap each tube out. You may have nightmares after
seeing the crud that collects around these babies.
Charlie ny