Re: Distributor Locking Screw, HELP!
Special welding rods are made for welding cast iron.
If the treads in the head are buggered up, pull the distributor and place a rag down the hole and re tap the threads. Vacuum out all the chips before removing the rag. Then buy a new screw and nut.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|