The Ford Barn - View Single Post - A-17081-B Folding Jack Handle

ctlikon0712 · 05-31-2012, 04:41 PM

Brent/Marco, I'm sure you realize, but I thought I'd just clarify for the casual reader, that the total length in the lower print is for the Tangent length of the crank section and the straight length of the other folded jack end. And I'm sure its straight leg length would be different too because of its different bend angle for the crank. Marco, be sure to give us a link, thanks.

05-31-2012, 04:41 PM	#7
ctlikon0712 Senior Member Join Date: Feb 2011 Location: Cocoa, Florida Posts: 1,609	Re: A-17081-B Folding Jack Handle Brent/Marco, I'm sure you realize, but I thought I'd just clarify for the casual reader, that the total length in the lower print is for the Tangent length of the crank section and the straight length of the other folded jack end. And I'm sure its straight leg length would be different too because of its different bend angle for the crank. Marco, be sure to give us a link, thanks. __________________ Wanted: Simmons Super Power Head Craig Likon 1931 150B Last edited by ctlikon0712; 05-31-2012 at 05:15 PM.