Quote:
Originally Posted by joel
Thanks, Kube. I installed the hoses with the long end on the pump to clear an aftermarket sway bar. I have almost an inch between the fan and radiator core; I am thinking about making a 1/4 in. spacer along with trimming the pump end of the new hoses. Does anyone see a problem with that? The radiator is stock with a new core. The engine mounts are new; maybe add a shim on top of the front biscuits.
|
Yu can trim a little off the end of each hose where it attaches to pump. That should allow clearance at your aftermarket sway bar as well as clearance to your fan.
I don't believe it's necessary to move your fan any closer to the radiator. A one inch clearance is about right.