View Single Post
Old 11-30-2010, 05:16 PM   #10
George/Maine
Senior Member
 
George/Maine's Avatar
 
Join Date: May 2010
Location: Mid coast Maine
Posts: 1,878
Default Re: Mallory tech answer to coil/ballast ?

I think you are better off with the resister. Keeps the current to 3 amps with a 1.5 ohms resister.This is safer.That would drop 4.5 volts across resister,leaving the rest at coil.If you don,t like the resister put it under dash.AS for the extra volts out of coil,i don,t think you will ever notice it.I'm still running points and mine starts and runs good.
George/Maine is offline   Reply With Quote