Thread: Pinion Removal
View Single Post
Old 05-26-2010, 09:22 PM   #5
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,339
Default Re: Pinion Removal

Hitting the treaded end with or with-out the nut is a good way to mess up the threads. Back the nut off as suggestive above, then take to a shop and have it pressed off. When they pop they do pop, make sure you have something like lead under the shaft so they don't mess up the spline end or floor.
redmodelt is offline   Reply With Quote