The Ford Barn - View Single Post

33cabriolet · 06-14-2013, 12:17 PM

A 2" hole saw will cut a hole a little larger than 2" most of the holes are right at 2/16" or a half round file will enlarge the hole to fit the gauge.
John

06-14-2013, 12:17 PM	#10
33cabriolet Senior Member Join Date: May 2010 Location: Graham WA Posts: 424	Re: Cutting holes for gages... A 2" hole saw will cut a hole a little larger than 2" most of the holes are right at 2/16" or a half round file will enlarge the hole to fit the gauge. John