View Single Post
Old 07-23-2011, 10:02 AM   #4
Fartman
Member
 
Fartman's Avatar
 
Join Date: Jul 2011
Location: adelaide,australia
Posts: 99
Default Re: 1933/34 ford chassis identification?.

I have 2 chassis.the one that came with the car has been molestered badly (front and rear chassis horns removed,front cross member removed and mustang front end added,rear cross member has large hole cut for coil overs) I started to fix this chassis by removing mustang front end and replaced with original cross member,and replaced the rear with a uncut original,the number on this chassis is *8<->4####1*.but then i found a original rolling right hand drive chassis which i would rather use as it is complete,its numbers are completely differant,*13-f1#####6*.I dont know if there is any differances between the 33-34,but i want to put my 33 coupe body onto what i think is a 34 chassis,i have seen in a M.A.C.S.catalog that the 34 wheel base is 6 inches longer will this cause a proplem with placing the 33 body on a 34 chassis,the front shocks on the rolling chassis are mounted on the out side,thanks Martin
Fartman is offline   Reply With Quote