Re: Rusty Drip Rail
had some tech problems with computer sorry for the delay. no pics sorry as i said the driprail material was supplied by the owner. if you have a duct ac/ heat fab shop they may be able to roll them for you . i ground the flat side where chrome would go to the needed depth where i could lay the replacement over it so the old would be on the inside of the new rail and bonded the bottom of the new to the bottom of the old . i used 3m panel adhesive to bond them to the old. 3m makes many sealers i prefer the urethane ones they make a self leveling one that works great for driprails
|