Thread
:
Ignition timing 1941 flathead
View Single Post
03-31-2013, 02:23 PM
#
3
ken ct
BANNED
Join Date: May 2010
Location: stratford,ct
Posts: 5,971
Re: Ignition timing 1941 flathead
You must set points with the coil screwed down to the dist,or you will lose about .003-.004 " setting with out it.So your down to around .011 setting if coil was not on it.Recheck it with it on. ken ct.
ken ct
View Public Profile
Find More Posts by ken ct