Re: 32 Transmission Refresh
Quote:
Originally Posted by jim1932
Then again....is this supposed to look the same on both sides?
I was focused on the grooves.
|
That's the reverse idler gear . 38 coupe was referring to the 1st/reverse sliding gear that meshes with the cluster gear.
The reverse idler gear only sees action on one side, as the 1st/reverse gear slides back to engage with the reverse idler gear to reverse rotation of the output shaft.
PS....unless you already have a copy, I would recommend that you purchase a copy of Mac VanPelt's transmission book. It will tell you most everything you need to know about these early Ford 3 speed transmissions.
__________________
John
"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein
Last edited by JM 35 Sedan; 08-16-2023 at 01:44 PM.
|