The Ford Barn - View Single Post

Ole Don · 07-03-2011, 07:03 PM

Before trying to turn it over with the starter, remove the rocker cover, and any valve that is closed, press down with a hammer handle to make sure its not stuck. Roll the motor over with a socket on the front nut, then check the other valves. If they all go up and down, do like it says above.

07-03-2011, 07:03 PM	#7
Ole Don Senior Member Join Date: May 2010 Location: St. Michael, Minnesota Posts: 1,713	Re: Starting a 1956 Ford pickup Before trying to turn it over with the starter, remove the rocker cover, and any valve that is closed, press down with a hammer handle to make sure its not stuck. Roll the motor over with a socket on the front nut, then check the other valves. If they all go up and down, do like it says above.