The Ford Barn - View Single Post - How do you remove worn king pin bearings from the spindle?

van Dyck · 08-13-2010, 12:12 AM

Sunnen (manufacturers of professional honing equipment) highly recommend that the machinist burnish the bushings into their bores to "lock" them in place. Then do the precision hone. I've never had a failure doing it the Sunnen way!

08-13-2010, 12:12 AM	#11
van Dyck Senior Member Join Date: May 2010 Location: Saskatchewan, Canada Posts: 190	Re: How do you remove worn king pin bearings from the spindle? Sunnen (manufacturers of professional honing equipment) highly recommend that the machinist burnish the bushings into their bores to "lock" them in place. Then do the precision hone. I've never had a failure doing it the Sunnen way!