View Single Post
Old 06-09-2019, 11:29 AM   #5
jquinlan
Senior Member
 
jquinlan's Avatar
 
Join Date: Aug 2018
Location: Foley, Al
Posts: 142
Default Re: Two piece crank shaft pulley

That was a good article in the restorer - very informative. First thing I did was run out and check if I had a 1 or 2 piece. Was glad mine is a 2 piece. Even though it's a part that rarely fails, at least if it does it won't mean a major headache by the side of the road.
__________________
Jim
jquinlan is offline   Reply With Quote