View Single Post
Old 09-20-2014, 08:51 AM   #93
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: Do I really have to find a spring spreader?

Whenever spring removal is a topic the year of the spring is often not part of the thread. The spring pack itself almost always has tension, but the tension between the spring perches varies by the years. Earlier car have the springs spread quite a bit while the later years have very little spread. In the 60s and on up a lot of springs have a fixed end and a floating end with no spread tension. So it is going to depend a lot on the year as to how difficult a spring is to remove and which method of removal works best.
JSeery is offline   Reply With Quote