The Ford Barn - View Single Post

Vic Piano · 09-15-2014, 05:37 AM

When I replaced the 'rubber ball' on the wishbones in our '39 CS & '39 LZ, I did it with the cars up on the four post lift. I simply pulled the wishbone down, put the rubber ball in the cross member, with the hole facing the ball on the wishbone, and let the wishbone go. The weight of the car forced the wishbone ball into the rubber ball.

09-15-2014, 05:37 AM	#12
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: Radius rod rubber ball??? When I replaced the 'rubber ball' on the wishbones in our '39 CS & '39 LZ, I did it with the cars up on the four post lift. I simply pulled the wishbone down, put the rubber ball in the cross member, with the hole facing the ball on the wishbone, and let the wishbone go. The weight of the car forced the wishbone ball into the rubber ball. __________________ Imagination is more important than knowledge.