Quote:
Originally Posted by V8COOPMAN
Lawrie...With ALL due respect ('cuz YOU do some nifty stuff), putting ANYTHING on that taper defeats the purpose of how a machined-taper is designed to function. It should go back together clean, dry and tight. Think about the physics of a MORSE TAPER. DD
|
Coopman, you are 100% correct about this. It was always amazing what a Morse taper could hold. I recalll clearly using a 6" drill bit in a vertical drill press... no problem holding it with a Morse.
One thing I'd like to add - the mating surfaces should be SMOOTH. Any marks remaining from polishing compound, etc. lessen the grip.