The Ford Barn - View Single Post

Crazydaddyo · 11-30-2013, 06:41 PM

If you don't have a pressure oiling, then you will need the dippers.
You can make some out of sheet metal and hold them on with the rod bolts. I've seen that done on T engines to improve the oiling to the rods.

11-30-2013, 06:41 PM	#4
Crazydaddyo Senior Member Join Date: May 2010 Location: Orange, Ca. Posts: 197	Re: dipper or no..Q If you don't have a pressure oiling, then you will need the dippers. You can make some out of sheet metal and hold them on with the rod bolts. I've seen that done on T engines to improve the oiling to the rods.