The Ford Barn - View Single Post

Ron W · 11-30-2013, 04:42 PM

Take off a rod cap and see if there is a hole in the crank. If so you probably have a pressurised system. You may be OK as is but I would rotate the oil pump to confirm oil comming out of the crank at the rod. Ron W

11-30-2013, 04:42 PM	#3
Ron W Senior Member Join Date: Jan 2011 Location: Central Me. Posts: 260	Re: dipper or no..Q Take off a rod cap and see if there is a hole in the crank. If so you probably have a pressurised system. You may be OK as is but I would rotate the oil pump to confirm oil comming out of the crank at the rod. Ron W