Re: '39 pedals in a '35
Robert-
You should find that after you mount the '39 assembly in your '35 your clutch pivot will not align with the throw-out bearing arm on the transmission. You only have two realistic choices at this point to correct the alignment. 1) weld an extension on the '39 to move the pivot to the right (see pictures) or 2) use a '39 transmission arm which has a factory bend (see picture). The problem with the '39 transmission arm is finding one! Of course you can do nothing and run the connecting arm on an angle or bend it. For me, both approaches are at best kind of crude but it is commonly done.
Tom
|