The Ford Barn - View Single Post

Terry,OH · 11-21-2013, 07:20 AM

Either of the two pilot bushing or bearing will work well if they are new. The U-Joint cavity takes about 4 to 5. OZ of semi fluid lubricant, some guys put an entire tube of Corn Head in there (not a fluid). The type of lube is a matter of personal preference I do not use the Corn Head, but prefer 0-0 grease.

11-21-2013, 07:20 AM	#5
Terry,OH Senior Member Join Date: May 2010 Posts: 4,799	Re: early V8 questions Either of the two pilot bushing or bearing will work well if they are new. The U-Joint cavity takes about 4 to 5. OZ of semi fluid lubricant, some guys put an entire tube of Corn Head in there (not a fluid). The type of lube is a matter of personal preference I do not use the Corn Head, but prefer 0-0 grease.