The Ford Barn - View Single Post - 1922-25 T Horn plus a Sparton Horn

Bud · 09-26-2013, 08:47 PM

I cleaned the mud off the Model T horn. I did not see a Ford Script, but it has a lot of enamel paint and it might still be there. The horn conforms to these dimensions: 10" total length, 8" projector length, 3.0" projector diameter. On the back motor cover it has "MADE IN", below that is a diamond <>, and below that is "USA". If it is anything like a Model A horn, a diamond indicates AMES made by the Heinze Electric Company. It definitely is a Model T horn because I identified it from the photo in the book I noted. Please note that this horn is not pristine. It has some dings in the front edge of the projector and a small dent in the projector body, plus a bit of surface rust.
I'll take $40 plus shipping. Thanks.

09-26-2013, 08:47 PM	#8
Bud Senior Member Join Date: May 2010 Location: Ohio Posts: 819	Re: 1922-25 T Horn plus a Sparton Horn I cleaned the mud off the Model T horn. I did not see a Ford Script, but it has a lot of enamel paint and it might still be there. The horn conforms to these dimensions: 10" total length, 8" projector length, 3.0" projector diameter. On the back motor cover it has "MADE IN", below that is a diamond <>, and below that is "USA". If it is anything like a Model A horn, a diamond indicates AMES made by the Heinze Electric Company. It definitely is a Model T horn because I identified it from the photo in the book I noted. Please note that this horn is not pristine. It has some dings in the front edge of the projector and a small dent in the projector body, plus a bit of surface rust. I'll take $40 plus shipping. Thanks.