The Ford Barn - View Single Post

James G. · 07-18-2013, 04:47 PM

The brass plug should fit like a cork in a wine bottle. Just tap it in with moderate force. If the plug is much larger than the hole there may be some danger in cracking the casting. Use care.

07-18-2013, 04:47 PM	#2
James G. Senior Member Join Date: May 2010 Location: maryland Posts: 183	Re: Brass Carb Plugs The brass plug should fit like a cork in a wine bottle. Just tap it in with moderate force. If the plug is much larger than the hole there may be some danger in cracking the casting. Use care.