The Ford Barn - View Single Post

1931 flamingo · 05-02-2013, 11:48 AM

Have you loosened the locking screw on the side of the head??
Try mixing ATF and acetone 50/50 and soak into and around the body. I finally ended up using a 3 ft crow bat to get mine out, and no I didn't break the casting. If you do a search you will find that many have had nothing but problems with the modern points. FWIW
Paul in CT

05-02-2013, 11:48 AM	#9
1931 flamingo Senior Member Join Date: May 2010 Location: new britain,ct 06052 Posts: 9,393	Re: Distributor Stuck! Have you loosened the locking screw on the side of the head?? Try mixing ATF and acetone 50/50 and soak into and around the body. I finally ended up using a 3 ft crow bat to get mine out, and no I didn't break the casting. If you do a search you will find that many have had nothing but problems with the modern points. FWIW Paul in CT