View Single Post
Old 04-22-2013, 03:13 PM   #2
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,925
Default Re: Hub cap question

Sounds like a standard and proper installation to me. You should not be able to pop them on and off. You have to bend those tabs. But three or four are adequate; you don't have to bend them all over.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)