Thanks for the tip Tub ,Yes I believe the Plymouth ones also the same . I was thinking of machining a ridge then make the triangle bit compress like a clamp .The welding would be OK but we have the Govt inspectors here who will go over it before it can be registered ,But I will look into the chev one ,
Quote:
Originally Posted by tub
hey there Ted if you don't want to weld on a bracket have a look at a chev 4 steering box clamp it fits inside of the chassis ,and if you find a 1937 -1938 hudson steering box you can do the same job as the chrysler one ,i know all this works we did the conversion on 2 model a fords over 20 years ago and there both still going fine
|