The Ford Barn - View Single Post

Bob/Pa · 12-21-2012, 11:24 AM

If there down all the way the mounting holes will line up, if that is ok then the door panels are causing the problem. I'm using repo's and holding an edge of carpet and had no problems.

12-21-2012, 11:24 AM	#14
Bob/Pa Senior Member Join Date: May 2010 Location: Oakmont, Pa (Longwood) Posts: 298	Re: Scuff plates If there down all the way the mounting holes will line up, if that is ok then the door panels are causing the problem. I'm using repo's and holding an edge of carpet and had no problems.