View Single Post
Old 08-16-2012, 04:12 PM   #7
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Tried everything

If the engine was still in the car I'd use a socket and breaker bar on the crank nut. Lay the breaker bar against the left frame and click the starter with the key OFF.

Now that the engine is out of the car, I's try a quality impact wrench. Some apply much more torque than the cheap ones.
Tom Wesenberg is offline   Reply With Quote