The Ford Barn - View Single Post

George/Maine · 09-19-2011, 05:24 PM

Bubba
You have the dist,You are the man,Is there any thing wrong with the rotor when its locked in is the drive slot in line with innner rotor.Looks like the drive slot in rotor is deep in side and could be made wrong.In changing the wires wouldn,t be the first time they got missed up.
Note Those caps and interchangeable and if wired at the comfort of your bench,and grabbed both at same time you have a 50/50 chance of getting the right set on the correct side.

09-19-2011, 05:24 PM	#140
George/Maine Senior Member Join Date: May 2010 Location: Mid coast Maine Posts: 1,878	Re: 1937 No start Bubba You have the dist,You are the man,Is there any thing wrong with the rotor when its locked in is the drive slot in line with innner rotor.Looks like the drive slot in rotor is deep in side and could be made wrong.In changing the wires wouldn,t be the first time they got missed up. Note Those caps and interchangeable and if wired at the comfort of your bench,and grabbed both at same time you have a 50/50 chance of getting the right set on the correct side. Last edited by George/Maine; 09-19-2011 at 09:33 PM.