Re: 1937 No start
OK , been busy but got the distributor on the machine with the new coil attached , keep in mind i do not have the cap halfs or the condensor.
It ran with even firing pulses and the coil checks right on the money.
The only thing i seen at all was some residue of some kind on the coil output terminal that wiped off with a rag and didnt seem to have any effect when i tested the coil .
SO whats next ? I have the unit entirely torn down and will redo the entire process and post the pics as we go for a good on line discussion.....
So hang on here we go....
|