The Ford Barn - View Single Post

Tooltime109 · 03-27-2024, 07:25 AM

Great information about the bearings!!!
Do you have a video or write up about the polishing process???
If not, what scotchbrite pads used ???
How did you insure that the bearing thickness was even!
Thanks
Tim

03-27-2024, 07:25 AM	#12
Tooltime109 Junior Member Join Date: Jan 2024 Posts: 1	Re: Tap rod bearings into shape?? Great information about the bearings!!! Do you have a video or write up about the polishing process??? If not, what scotchbrite pads used ??? How did you insure that the bearing thickness was even! Thanks Tim