The Ford Barn - View Single Post

Bored&Stroked · 03-20-2024, 08:09 AM

I had no problems with the video - understood everything. In looking at Dyno pull #2, the engine is either breaking up due to the ignition or floating the valves at about 3800 RPM. Both torque and HP bounced around and fell right off. Given this is in a stock type application, it is a good running engine.

03-20-2024, 08:09 AM	#9
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,167	Re: 255 Merucry Dyno Pull I had no problems with the video - understood everything. In looking at Dyno pull #2, the engine is either breaking up due to the ignition or floating the valves at about 3800 RPM. Both torque and HP bounced around and fell right off. Given this is in a stock type application, it is a good running engine.