The Ford Barn - View Single Post

Synchro909 · 12-19-2023, 04:32 PM

If there are concerns about water entering the rear end through a simple drilled hole in the plug in the Mitchell tube, why not drill it and install an elbow and a piece of PVC tubing like Mitchell puts on the O/D itself? The other end of the tube is attached to the under side of the floor. You can be as creative as you like on how to shield it from water splashes.

12-19-2023, 04:32 PM	#5
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,560	Re: Differential vent If there are concerns about water entering the rear end through a simple drilled hole in the plug in the Mitchell tube, why not drill it and install an elbow and a piece of PVC tubing like Mitchell puts on the O/D itself? The other end of the tube is attached to the under side of the floor. You can be as creative as you like on how to shield it from water splashes. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.