The Ford Barn - View Single Post

Jack E/NJ · 12-13-2023, 07:39 PM

B&S>>They were not milled - this was all due to the casting patterns they used. Why? Who knows>>>

What I meant was only the raised area would need to be milled for a good seal, not the whole top. So less milling costs.

12-13-2023, 07:39 PM	#114
Jack E/NJ Senior Member Join Date: May 2010 Posts: 2,174	Re: Shoud I relieve my block B&S>>They were not milled - this was all due to the casting patterns they used. Why? Who knows>>> What I meant was only the raised area would need to be milled for a good seal, not the whole top. So less milling costs.